10 Best Corded Drills 2017
10 Best Corded Drills 2018
Best Corded Drills Buy in 2017
Powerfist 1/2 in. 9A. Spade Handle Electric Drill – Product Review
Special Discount on Makita DS4012 Spade Handle Drill, 12 Inch
Top 9 Best Corded Drills 2018
10 Best Corded Drills 2016
DA4031 Makita Drill – Makita DA4031 10 Amp 1/2-Inch Angle Drill – Right Angle Drill
DS4012 TALADRO MAKITA
Máy khoan góc Makita DA4031
Amazon Price: $159.00 $149.99 You save: $9.01 (6%). (as of February 15, 2019 9:36 pm –
Includes 1/2-in Spade Handle Drill – DS4011-R, Drill Chuck, Chuck Key, Side Handle
Nice drill but needs variable speed
8 of 9 people found the following review helpful
I purchased this drill from HD after returning the Dewalt 130 because it was so loud (annoying high pitched gear whine). I’ve been mixing mortar for a tile job and my regular corded makita ran too fast to control (2800 rpm)even though it was variable speed. And it was laboring…getting nice and hot. So I recognized that it was time to buy a good heavy duty drill that could run at low speed and with enough torque to pull the mixer. This drill is powerful and much quieter than the Dewalt that I took back and it runs at 600 rpm perfect for mixing. But with no variable speed it really only can do mixing. I wanted a drill that I could also use with self feeding auger bits. 600 rpm is too fast to control there. This one is going back for that reason.
great to mix lots of torque
3 of 3 people found the following review helpful
I use it for lots of mixing jobs ,thin set , concrete, paint, grout . Very light weight and lots of torque. the rotation handle makes it easy to hold.
2 of 2 people found the following review helpful
This drill is the classic key chuck 1/2″ drive makita drill. Performs great and well worth its price. High quality product.
3 of 4 people found the following review helpful
very nice drill however, I needed a variable speed option and this drill did not have that feature. Customer service is excellent, shipping time excellent, all positive!
Gets the job done, but no variable speed
2 of 3 people found the following review helpful
This thing is a beast. I bought it to mix stucco and small amounts concrete (approximately one bag mixed in a drywall bucket). Works great, no issues. I have also used it for drilling steel, with good results. I bought a house previously owned by a drug dealer and found a floor safe built into the concrete foundation in the garage that was hidden under linoleum I removed. I used the DS4011 to drill the safe. Since you can’t adjust the speed, you have to change the size of the bit to match the rpms for the type steel that you are cutting. The drill has a lot of torque. If you break through, or go to a dissimilar material, the drill will twist, hard. Be ready for it. Another thing if drilling steel with this thing is to use plenty of cutting fluid and use weights to apply the cutting force (if going downwards) so you can brace for the drill torquing. I used boa steel shot weights from Matthews wrapped around the D spade handle at the top. Use cobalt bits. I used this drill continuously, for hours, drilling through the safe and it has worked fine since then on more mundane tasks. The drill I got was labeled ‘assembled in USA’ which is always a plus.
improve my performance and lower my stress levels I purchased this and have been happy about it since
I’ve spent years of mixing mud , thin set , and grout either by hand or using my Makita battery powered hammer drill. After burning out two drills , plenty of frustration , and even more improper consistency with my product, I found this gem . Deciding to up my game , improve my performance and lower my stress levels I purchased this and have been happy about it since. This drill has only one speed but it has power. I would recommend this to anyone who does remodeling . Only negative is it did not come with a case or bag but that’s a cheap fix
2 of 3 people found the following review helpful
Solid drill as expected from Makita. The Canadian model of the DS4011 happens to only be a 6.5 amp motor while this US version has an 8.5 amp motor, which is a plus. I use this mainly to mix mortar, concrete and the like. The only downside of this particular one listed is that it does not come with the plastic carrying case which is essential when on the job and finding one to purchase has proven very difficult. Other than that, it’s great.
works great and is quieter than the dewalt im used to
Not sure why people dont read and reaearch the products they order before hand? anyway im a mason of 12 years and went from dewalt to this makita and mix daily premix in a 5 gallon bucket. works great and is quieter than the dewalt im used to. chuck actually fits in the side of drill casing which is cool!!!
Quick delivery and only had for a short time but seems to be just like the old one I had before.But better price and delivered to the house.
nice and compact, i love it and would recommend it to anyone. Hopefully its strong enough for mixing tile cement