Makita DA4031 10 Amp 1/2-Inch Angle Drill – Right Angle Drill –
Makita DA4031 Angle Drill
Best Power Right Angle Drills | Top 10 Best Power Right Angle Drills
Makita DA4031 Comparable to Milwaukee Super Hole Dawg Discussion
Makita Angle Drill 13mm 1/2" DA4000LR & Demo
Power Right Angle Drills to buy
DEWALT DW124 11 5 Amp 1/2-Inch Right Angle Drill – Power Right
Makita Angle Drill Model# DA4301
Angle Drill Repair – Replacing the Chuck (Makita Part # 193319-5)
Máy khoan góc Makita DA4031
Amazon Price: $383.70 $379.00 You save: $4.70 (1%). (as of September 25, 2018 12:49 am –
The sidewinder handle on this angle drill rotates 90 left or right for versatile drill positioning. The 10 Amp motor provides powerful performance and the toque limiter disengages the motor if the bit ever binds low speed only. The tools heavy-duty side handle means extra support, and you can store the hex wrench in the adjustable top handle. An ergonomically designed grip provides even more comfort and less operator fatigue. this two-speed drill has a no-load speed of 300 RPM on low and 1200 RPM on high. Chuck Size in. 1/2, Speed RPM 300, 1,200, Variable Speed Yes, Amps 10, Side Handle Yes, Case Included Yes, Keyless Chuck No.
I am not a pro, but I have a bunch of holes to drill thru joists to run electrical and PEX plumbing. I got tried of having my wrist almost tore off every time my cordless Makita 1/2″ drill’s bit caught a little while drilling.
People often opt for the Milwaukee because of the RPM, and while slightly noticeable it will not be detrimental by any means. It’s high quality and very solid in your hand. The ergonomics are great and it’s shorter than the Milwaukee(which I use quite often for my company.) it’s going to do me well as my personal for many years. Note* it is from Japan as well so that’s a plus.
The perfect tool for the right application: **Heavy Duty**
1. Arrived in few short days as promised. The power angle drill comes with a
The best drill on the market
The best drill on the market, I work as HVAC installer and this drill is safest way to drill 6″ holes. Its a bit expensive , but by been punched in the face with a high speed drill handle while drilling is painful . So get it before you get hurt.
The best, hands-down
I used to have one of these, and it was the greatest thing ever. Unstoppable, even with a six inch hole saw on it, but balance, leverage and a clutch so I never got hurt.
Great drill for large Jobs
I run a construction company and I order this drills for my guys all the time. I personally have only used it once. I used to use the Milwaukee hog drills back when I used to used them for construction a lot so I would get my guys those but they keep burning out so my guys ask for this all the times. Now my guys still burn some of this out some times but takes them about 5x longer to do that. I would have to say for the time being definitely the best Hog drills out there at the moment. Pricing around $400 is also a decent price for them
Very strong drill. Puts the whole hawg to shame
I needed this tool to bore holes for pipes and conduit. My first use was to bore 2″ hole through a tripled plate. I was astounded that the drill pushed through the 3 2X plates in less than 15 seconds. Over the last few months That same performance has been repeated over and over again. I have found that it is a little large to get into a few spots, and the weight gets to you after a while of continuous use.
Makita’s super drill !
I’m quite familiar with the old Milwaukee Hole- Hawg having used and owned one for twelve years. I also own the Milwaukee Super-Hawg as I constantly use self-feeding and auger bits to bore holes for pipes, cables, and wires. I had heard a great deal about Makita’s DA4031 and read every piece of information I could get my hands on about it, prior to purchase. This a great drill ! The fit and finish are beyond expectation ! The location of all the handles is perfect ! Why a drill costs what it does and how well it performs depends on it innards : it’s gearing,bearings and motor construction. This tool wasn’t designed via an accountant’s balance sheet, but rather at the drawing board. This is a fine example of Makita’s commitment to quality.
Better than the heavy ugly Milwaukee drill. We did an entire house with this drill, and it worked perfectly.